Batten light with T8 LED Tube lights 2ft 4ft 5ft
- Length:600mm 1200mm 1500mm optional
- Power:9W 18W 22W 36W 44W Optional
- Input voltage:100-265VAC 50/60Hz,AC/DC12V 24V 36V 48V can be customized
- Driver: Non-isolated driver CE EMC approval, Free flicker.
- Power factor:>0.9
- Color temperature:3000K-6500K
- Beam angle:120°
- Working life:50000Hrs
- IP Grade: IP65 Waterproof
- EMC LVD CE RoHS
This batten light is consists of batten light housing and T8 LED Tube lights, It is easier to do any replacements or maintenance. The T8 LED Tube lights will save much more energy than traditional fluorescent tube lights. More and more people choose the batten light with led technology.
|Model||Power||Input voltage||LED Chip qty||Lumens||CRI||Materials||Replacement|
|GR-TPS-2F9W||9W*1||100-240VAC||48pcs||810-900lm||80||ABS+PC Cover||1x18W old tube light|
|GR-TPS-4F18W||18W*1||100-240VAC||96pcs||1650-1800lm||80||ABS+PC Cover||1x36W old tube light|
|GR-TPS-5F22W||22W*1||100-240VAC||120pcs||2000-2200lm||80||ABS+PC Cover||1x45W old tube light|
|GR-TPD2F18W||9W*2||100-240VAC||96pcs||1650-1800lm||80||ABS+PC Cover||2x18W old tube light|
|GR-TPD-4F36W||18W*2||100-240VAC||192pcs||3300-3600lm||80||ABS+PC Cover||2x36W old tube light|
|GR-TPD-5F44W||22W*2||100-240VAC||240pcs||4000-4400lm||80||ABS+PC Cover||2x45W old tube light|
Light Distribution Curve
- 2ft 4ft 5ft length optional, and the other length such as 3ft 8ft can be customized as well.
- batten lights with single or Twin t8 led tube lights optional which will meet different customer’s requirements.
- All of our led batten light fittings only use high-quality materials such as ABS Bottom or PC Bottom+PC Cover which is strong, not easy to break, at the same time it has a high fire rating, waterproof and anticorrosive
- Stripe PC Cover, clear PC Cover, or Frosted PC Cover optional.
- Plastic clips or Stainless steel clips optional.
- Lighting batten use high-quality rubber as a waterproof ring, long service life, high-temperature resistance, waterproof, dust, and fog
- It is available to do emergency backup battery,1hours,2hours,3hours optional.
- It is easier to replace any broken light sources than the one with SMD chips instead of T8 LED Tube lights.
It is ok for this led batten light fittings to do surface mounted installation and suspension mounted. Most customers only do surface mount installation for it.
Step 1. Cut off electricity before install this commercial led batten.
Step 2. Using screws to fix the snaps onto the ceiling.
Step 3. Open the cover of batten light housing, then Put batten lighting housing into snaps.
Step 4, Connecting the wires to 100-240VAC.
Step 5.Install the T8 LED Tube lights into batten light housing, then test if it is working or not.
Step 6. Then close the PC Cover, finished.