Adjustable Downlights Pull Out Single Double Head

  • Single head/double heads optional
  • Power:7W 15W 20W 25W 40W 50W Optional
  • Input voltage:100-265VAC 50/60Hz
  • Efficicency:89%
  • THD<15%
  • Power factor:06.-0.9
  • Color temperature:3000K-6500K
  • Beam angle:12/24/38°
  • Working life:50000Hrs
  • Warranty:2-5Years
  • An emergency kit with 90minutes,120minutes available
  • Triac/0-10V/DALI Dimmable available

You can make an inquiry about this product.
Your e-mail will not be leaked.


These adjustable downlights can be with black or white powder-coated, and round or square optional, available to be the single head or double heads. It is the latest design in 2020, looks like a recessed track light, widely used for a commercial building, clothes stores, kitchen, living room. It is ok to be main led lights, or as accent lighting such as wall washer lights.


LED ChipsCREE/Bridgelux COB
Input voltage100-240VAC 50/60HZ; DC12V 24V 36V 48V available
Color tempearture3000K Warm white;4000-4500K natural white;6000-6500k cold white
MaterialsDie-cast aluminum, white finished
IP GradeIP22 Indoor use
Beam angle12/24/38°
RemarkCE RoHS LVD EMC can be approval. 2-5Years warranty


1 Rotate around 360°, stretch up and down, can be used as spotlights or cylinder downlights.

2.Die-cast aluminum housing, white/black finished, Anti-glare design
3. CREE COB LED chips, high luminous efficiency, low luminous decay, CRI90, increase the texture of the space lighting effect.
4. Famous constant current power supply, Philips, LiFud, Eagles, DONE, CE RoHS LVD EMC approval, no flicker.
5. The life span is as long as 50000Hrs, no need to replace the gimbal downlights for at least 5 years. Save energy and money.
6.Different color temperature option,3000K Warm white,4000-4500k natural white,6000-6500K cold white.

Installation steps

Step 1:Take out adjustable downlights and accessories. And cut off all of the power before install any led lights.
Step 2:Open hole onto ceiling according to the dimension of downlights.
Step 3:Connecting the wires of a led driver with 220V/110VAC Wires. Then testing if it is working.
Step 4:Upward the clips, then put downlights into the hole. Then finished installation.


  • Living room
  • Kitchen
  • Clothes stores
  • Supermarkets lighting
  • Shopping center

Related Product

Other Types of LED Lights


Similar Posts