Wall Washer Downlight 5W-25W | Model: GR-DL-G-6

The recessed wall washer downlight includes two types of frames: trim and trimless. The light body can be compatible with both frames. And it’s an adjustable structure, available for wall washer lighting. Anti-glare design with UGR less than 19. This 25° adjustable wall washer is the perfect solution for accent lighting in museums, living rooms, offices, supermarkets, hospitals, hotels, etc.

  • Cut out: Φ50/Φ70-75mm/Φ95mm/Φ115-120mm
  • Installation: Recessed or trimless
  • Control way: ON/OFF, DALI/0-10V dimmable optional
  • Beam angle: 15/24/36/50°
  • Body: Die-cast aluminum. matt black/white finish options
  • Reflector color: white/black/gun black/shining silver/gold options
  • Input voltage: 110/220-240VAC 50/60Hz
  • Power factor:>0.5 or 0.9
  • THD:<15%
  • LED chips: Bridgelux / Osram COB with CRI92, SDCM<5 or 3
  • Working life: 50000Hrs
  • IP rating: IP20 indoor use
  • UGR:< 19 anti glare
  • Color temperature: 2800K-3200K/ 4000K-4500K/ 5500-6500K
  • Certificate: CE LVD EMC RoHS
  • Warranty: 3/5Years

Order ModelWattagesTypeDimensionCutoutLumensDatasheets
GR-DL-7WG-65W/7WTrim or trimlessΦ62*H68mmΦ50-55mm500-700lmDownload
GR-DL-10WG-610WTrim or trimlessΦ83*80mmΦ70-75mm630-770lmDownload
GR-DL-15WG-615W±5%Trim or trimlessΦ105*100mmΦ95mm1400-1600lmDownload
GR-DL-20WG-620W±5%Trim or trimlessΦ105*110mmΦ95mm1800-2100lmDownload
GR-DL-25WG-624W±5%Trim or trimlessΦ134*110mmΦ115mm2300-2600lmDownload

  • Emergency backup kits
  • 0-10V/ Phase triac dimming/DALI dimming
  • 3CCT color changing
  • Zigbee smart downlight

7W 36° Wall washer with 75mm cutout

To achieve the ideal “hill” lighting effect, here are some suggestions:

  • Distance from Wall: Based on practical testing in an optical laboratory, it is recommended to install the lights at a wall distance of 15-20 cm to achieve a flawless hillock effect.
  • Distance Between Lights: Recommended to install the lights at a distance of 100-150 cm between them. A distance of 100-120 cm creates a connected hillock arc, while a distance of 120-150 cm results in the arcs intersecting lower down, and at 150 cm, the hillocks are not connected.
  • Corner Distance: It is recommended that the distance from the center of the spotlight’s cutout to the corner of the wall be greater than 100 cm.
  • Beam Angle: For wall-washing, the light beam should be directed straight without adjusting the angle, as adjusting the angle will affect the hillock effect. For general lighting (non-wall-washing), the beam angle can be adjusted to change the lighting area or provide direct illumination

Related Products

Let Us Talk Now