Stainless Steel Ground Lights(1-48W)
- Power:1W to 48W optional
- Beam angle:30°
- Input voltage:100-240VAC 50/60Hz. AC/DC12V 24V available
- Working temperature:-25℃~50℃,10%~90% R.H
- LED Chip: Epistar high power led chips
- Power factor:0.6
- Working life:50000Hrs
- IP Grade: IP65-IP66.IP67 can be customized
- recessed installation
The ground lights are made of stainless steel frame and aluminum body, toughed glass, it can be IP65 to IP66 waterproof outdoor use. Its power range from 1W to 48Watt.It plays an important role in outdoor landscape lighting and is widely used in squares, lawns, parks, pedestrian streets, etc.
|Input voltage||100-240VAC 50/60HZ, or AC/DC12V 24V input|
|Materials||Stainless steel frame+aluminum body+toughed glass+ABS embadded parts|
|Beam angle||30°. the other beam angle like 120°,10-15° can be customized|
|IP Grade||IP65-IP66 Waterproof|
|Color temp||3000K warm white,6000-6500K cold white, RGB, or Red,blue,green option|
|Remark||The other function such as DMX512, Remote control can be available|
- This ground light uses high-brightness LED chips, high brightness, low energy consumption, low light decay, uniform light output, soft light, and long service life.
- Using stainless steel cover and stainless steel screws, it is not easy to rust and fade, durable
- The lamps are fully glued and waterproof, with a good heat dissipation effect, not easy to yellow, and high and low-temperature resistance. The waterproof grade can reach IP65-IP66
- Voltage input 100-240VAC 50/60Hz, Low voltage type DC12V DC24V input optional
- The color temperature can be monochromatic light or RGB
- DMX512 remote control available
Installation for outdoor recessed ground lights
Step 1: Firstly dig a pit slightly larger than the embedded part.
Step 2: Put input wire into the embedded part, and fill the embedded part with cement.
Step 3: Connect the wires and fix the lamp body on the embedded part with screws.
Step 4: Testing if the led ground light is working or not.Then finished