Up down wall mounted lights exterior

  • Input voltage:100-265VAC 50/60Hz.DC12V 24V also can be customized
  • LED Driver: DONE Brand constant current driver, perfect quality.Free flicker
  • LED Chips: Epistar  LED Chips,80-90lm/W.CRI80
  • Materials:Die-Aluminum .white/black/green/red/blue housing options.
  • IP Grade: IP65 Waterproof
  • Color temperature:3000K Warm white;4000-4500k natural white,6000-6500K cold white.
  • Working life:50000Hrs.The lifespan duration 5-10years at least.
  • Triac dimmable/0-10V/DALI dimmable available if needed.
  • Working temperature:-25℃~50℃,10%~90% R.H.
  • Warranty:2-3Years
  • Adjustable beam angle, easy to get light performance what you prefer.

You can make an inquiry about this product.
Your e-mail will not be leaked.

Description

The wall-mounted lights are made of pure aluminum material, which is not easy to rust. The light source is LED chips, which is energy-saving and environmentally friendly. It is suitable for installation on the balcony, outdoor, entrance door, garden door, and other outdoor walls that can be exposed to rain. An indoor bedroom, bedside, picture, corridor wall, and other spaces, it is wall-mounted lighting that can be installed indoors and outdoor.

Parameter

ModelGR-WML-2x3WG
Power6W
Input voltage100-240VAC 50/60Hz.DC12V 24V 36V 48V available
LED ChipsEpistar
Lumens540lm
Color temperature3000K Warm white,4500K natural white,6500k cold white
CRI>80
MaterialsDie-cast aluminum
IP GradeIP65 Waterproof
Beam angle0-90°adjustable beam angle
Power factor0.6
Working life50000Hrs
CertificatesCan be CE RoHS LVD EMC Approval

Feature

  1. Up down directions. And it is ok to adjust the beam angle for what you would like.
  2. Die-cast aluminum housing, white/black/red/yellow finished available.IP65 Waterproof
  3. High-quality LED chips, high CRI, uniform light emission, high color reproduction
  4. Working with a Free flicker led driver, better to protect eyesight.

Installation

  1. Take out the flush mount wall light, its accessories, and take out the inner part of the light.
  2. Takedown the base from the inner part of the lights
  3. connecting the driver cables to 220VAC Wires, then fix the base.
  4. Screwing the inner body onto the base, then slip down the aluminum cover.

Related Product

Other Types of LED Lights

Blogs