LED Tunnel Flood Light 50W-300W – Asymmetric Beam for Road & Railway Tunnel

250W LED Floodlights
200W Tunnel LED Floodlights
Modular LED Floodlight
150W outdoor LED tunnul Floodlights
100W tunnul LED Flood lights
LED floodlight 250w for tunnel
  • 250W LED Floodlights
  • 200W Tunnel LED Floodlights
  • 150W outdoor LED tunnul Floodlights
  • 100W tunnul LED Flood lights
  • LED floodlight 250w for tunnel

    • This LED modular flood light starts at 50 watts on one module, with a maximum power of 600 watts. With a wide range of wattage options, it can be installed in a tunnel with 50W -200W, on top of the pole to be high mast floodlights, or to be used for football and basketball fields. When equipped with just one module, it is called a linear tunnel light, too. Built to marine-grade standards, this floodlight offers long-lasting performance, leading to significant cost savings.

    • LED chips: Philips SMD3030
    • CRI:> 70 or 80
    • Color temperature: 2700-3000K/4000K-4500K/6000-6500K
    • LED driver: Sosen/Moso/Meanwell/Philips/Suncom driver brand options
    • Input voltage: 110-277VAC 50/60Hz
    • Luminous flux: 120-150lm/W output
    • Working temp: -25/+55℃
    • Working life: >50000Hrs
    • Manufacturer warranty: 3/5 years
    • Certificates: CE RoHS LVD EMC
    • Asymmetric / Type T2/T3 lens – light directed onto the road surface, reduces wall luminance
    • IP66 + IK10 – waterproof, dust‑tight, 10J impact resistance
    • Corrosion‑resistant – aluminum housing with marine‑grade coating (salt spray ≥500h)
    • Linear or modular design – easy to arrange in tunnels
    Get a Quote

    Ref NumberWattageDimensionLuminous fluxMounting HeightMounting SpacingDatasheet
    GR-FL-50WM50W±5%75*315*140mm5500-7500lm4‑5 m5-6mDownload
    GR-FL-100WM100W±5%156*315*140mm11000-13000lm5-6m6-8mDownload
    GR-FL-150WM150W±5%237*315*140mm16500-19500lm6-7m8-10mDownload
    GR-FL-200WM200W±5%324*315*140mm22000-26000lm7-8m10-12mDownload
    GR-FL-250WM250W±5%399*315*140mm27500-32500lm8-9m12-14mDownload
    GR-FL-300WM300W±5%474*315*140mm330000-45000lm9-10m13-15mDownload

    • Voltage: AC 100-277V (standard) / DC 12V-48V (custom)
    • Beam: T2 / T3 / T4 asymmetric, or symmetric (if needed)
    • Emergency backup: 2h / 3h LiFePO₄
    • Dimming: 0-10V / PWM / DALI
    • Sensor: Microwave / PIR (energy saving)
    • Mounting: Wall/bracket/pendant
    • Private labeling & custom packaging

    • Road tunnels & underpasses
    • Railway tunnels & subways
    • Mining access tunnels (24V/36V DC custom available)
    • Industrial corridors & covered walkways

    Q1: Why an asymmetric beam for tunnels?
    Symmetrical beam lights up walls, causing a zebra effect (alternating bright/dark stripes) on the road. Asymmetric beam directs light onto the driving surface, improving uniformity and safety.

    Q2: Can I use this light in a high-humidity or chemical environment?
    Yes. IP66 rating and corrosion‑resistant coating (≥500h salt spray) are standard. For aggressive environments (tunnel washing, de‑icing salt), we recommend optional IP67 and upgraded coating.

    Q3: What is the difference between the T2, T3, and T4 beams?
    T2 – narrower distribution for single lane low ceiling. T3 – standard for 2‑3 lane tunnels. T4 – wider spread for large section tunnels or long underpasses. Provide your tunnel cross‑section for a free Dialux simulation.

    Related Products

    Let Us Talk Now