All in one solar street light 30W-150W
- Power: 30W 40W 60W 80W 100W 120W 150W optional, the other power such as 50W 200W 240W can be done as well if needed.
- Lumens: 100lm/W output,high brightness.
- Detective distance: 10-12meter.
- Detective beam angle: 120°.
- Controller: 12V 5A 8A 10A MPPT.
- LiFePO4 Battery: 3.2V solution or 12.8V solution optional.
- Condition Temperature:-20℃～60℃.
- Working life: 50000Hrs.
- Color temperature: 3000-6500K.
- Duration: 3-5 rainy days.
- Warranty: 2-3Years.
All in one solar street light is a simple but complete solar operation system, which integrates all the components in the system such as batteries, solar panels, controllers, and lamp holders on a single lamp. This can simplify a lot of installation steps, installation time, and costs. What is more, this series, its size is much bigger, in this case, it can be with much bigger power up to 100W 150W. More and more regions and countries with rich solar resources are adopting solar street lights all in one to replace traditional LED street lights.
|Equivalent||30W LED||40W LED||60W LED||80W LED||100W LED||120W LED||150W LED|
|Mono Solar Panel||18V 50W||18V 60W||18V 80W||18V 100W||18V 120W||18V 140W||18V 160W|
|Solar controller||12V 5A||12V 5A||12V 8A||12V 8A||12V 8A||12V 8A||12V 8A or 10A|
|Duration||3-5 rainy days|
|LED Chips||Philips smd3030 high brightness|
|Charging time||6-8 hours|
|Discharging time||30-36 hours|
|Sensor type||PIR sensor or Radar sensor, Or time controller|
|Install height||3m-12meter pole|
|Remark||Standard working model: It will be full power for lighting when it sensor any movements, but it will be only 20%-30% of power once there is no movement, which will try best to save energy.|
Feature for all in one solar street light
- Different sizes with different power optional, range from 20W to 150W, it can be work for small residential areas, official commercial places, or public places which is strict requirements.
- The standard all in one solar street lighting is with a microwave radar sensor, but it is available to do time controller.
- Our all in one solar led street light is ok to do it with Hybrid( the power energy will be from batteries priority, then energy will come from 220VAC once the batteries are lacking electricity. This solution will be the best for government public projects such as the main road.
- Mono solar panel with 21% efficiency, lifetime more than 20years.
- Philips LED Chips 3030 for all in one street lamp, its brightness can be up to 100lm/W, which is enough to replace any AC led street light fixtures.
- As a professional manufacturer in china, we only use the LiFepo4 battery for the solar street light fixture. The electrochemical performance of lithium iron phosphate battery cathode material is relatively stable, avoiding the risk of explosion and fire，and its cycle life can reach 2000 times, meaning the led all in one solar street lights can be more than 5years in a lifetime.
- Highest quality PWM controller, or MPPT solar controller option.
- It is ok for us to customize the all in one solar street light with a camera which you can monitor the places under the street light pole.
- Different installation junctions can be customized. one is for 180° Vertical pole same as pole light; the other is a straight junction for Arm-type street light pole as the following picture. The installation is very easy no matter which junction you choose, only insert it into the pole, and then use screws to fix it.
The main advantage for this all in one solar street light
- It is with a photocell switch, which means it can turn on/off according to the Illuminance. No manual switch required, saving management cost.
- The entire system is operated by solar power, does not require any power support, and can be installed in any remote place where there is a lack of electricity, 100% energy saving.
- All in one solar street light integrates all accessories, eliminating the trouble of wiring and simple installation.
Work Model for all In one solar street light
Standard working model: It will be full power for lighting when it sensor any movements, but it will be only 20%-30% of power once there is no movement, which will try best to save energy.
But, we will provide a remote controller for each order, you can set up the working model for every solar street lighting all in one as following:
- Parking lots
- High way/motorway