Led Wall Washer Light Bar
- Input voltage: DC24V
- Material: Die-cast aluminum.
- Luminous flux: 90lm/W.
- Beam angle :30°.
- Colors: 3000K/6500k/RGB
- Dimension: L980*W38.5*H30mm
- Protection grade: IP65
- Power:18W 24W 36W
- Installation: Surface.
- Working life: >50000Hrs.
- MOQ: 1PCS.
- Model: GR-WW-XXW B Series
This led Wall washer light bar is with smaller size, but integrates a safe low-voltage DC12V DC24V circuit system that is more suitable for outdoor use. At the same time, the latest shell design scheme is adopted, and the structure is waterproof (no glue filling and waterproof treatment is required), which not only improves the waterproof effect, but also reduces the weight of the lamp. Wall wash light bar cooperates with low voltage DC power supply to achieve normal work. There is no need to worry about the risk of electric shock, even if it is used outdoors in rainy days,
|LED Quantities||18pcs Philips||24pcs Philips||36pcs Philips|
|Control gear||No included DC Power supply|
|Input voltage||DC24V DC12V|
|Materials||Die-cast aluminum+ toughed glass cover|
|IP Grade||IP65 Waterproof|
- Single-color, or RGB
- Standard working model for constant on or DMX512 Color changing
- Output cable 0.25m,0.5m,1m,5m available
- DC12V DC24V or DC48V available
- Philips/Osram SMD3030 Chips, higher lumens output.
- Waterproof structure design. Higher protection grade.
- Low voltage DC24V or 12V input, it will be much safer for outdoor building use.
- Revolving bracket, you can adjust the direction and angle of irradiation at will.
- Long lifespan more than 50000hrs. Very suitable for big outdoor projects.
- We can provide the layout design of projects for our led wall washer lighting.
Installation and wiring
There are different wiring for different solutions ( DMX512 control type and Standard single color type) as following
Single color type outdoor wall washer light bar installation instruction.
1. Please check if the working voltage is DC24V. This is DC24V type wall washer lighting bar, Don’t connect any AC 110V or 220V.
2. During the installation process, the connector must be tightened. The load of each group does not exceed 5 meters wall washer light bar. Pay attention to waterproof treatment at the end of each group.
3. When connecting the DC24V power supply, pay attention to distinguish the positive and negative poles. If the connection is reversed, the light may not turn on or the light will burn out.